Playwell Pools Inc.

Fiberglass Pool Installation | Lake County

Fiberglass Pool Installation in Lake County, FL

A fiberglass pool is a one-piece shell made in a factory, delivered by truck and set by crane into a prepared hole, then plumbed, backfilled and finished with coping and a deck.

Playwell Pools serves Lake County, FL. Lake County lies west and northwest of Orlando; its county seat is Tavares.

Swimming pool

Family-owned

40+ years

Building pools since 1985

Certified Pool/Spa Contractor

CPC1457140

Active Verify on DBPR

Certified General Contractor

CGC1511541

Active Verify on DBPR

Counties served

Orange, Seminole, Osceola, Lake, Volusia

Central Florida, from Orlando

How it works

Fiberglass Pool Installation, step by step

The order of work for fiberglass pool installation in unincorporated Lake County, where the permit and its inspections run through the Lake County Office of Building Services. Playwell gives a project-specific schedule after the site review.

  1. Shell selection
  2. Access check
  3. Excavation and base
  4. Set, level and plumb
  5. Backfill
  6. Coping, deck and barrier

Each step explained: fiberglass pool installation overview

Permits in Lake County

Who reviews and inspects the work

Lake County Office of Building Services

The county's residential pool checklist asks for construction plans signed and sealed by an architect or engineer, pool equipment specifications, TDH calculations and a zoning clearance, plus a recorded Notice of Commencement when the job value is over $5,000. Homes inside a city's limits usually permit through that city's own building department; confirm which office covers your address before applying.

Checked on the official site on 2026-10-21. Requirements change; the building department's current checklist governs.

Every new residential pool in Florida needs one of five safety features before it can pass final inspection (s. 515.27, F.S.). Many HOAs also require architectural approval before work starts.

Pool permits and HOA approval Florida pool safety law

Fiberglass Pool Installation in Lake County: common questions

Who issues pool permits in Lake County, FL?

The Lake County Office of Building Services. The county's residential pool checklist asks for construction plans signed and sealed by an architect or engineer, pool equipment specifications, TDH calculations and a zoning clearance, plus a recorded Notice of Commencement when the job value is over $5,000. Homes inside a city's limits usually permit through that city's own building department; confirm which office covers your address before applying.

Does the Lake County Office of Building Services cover every address in Lake County?

The county office handles unincorporated Lake County. Homes inside a city usually permit through that city's own building department; confirm which office covers your address before applying.

Does a fiberglass pool still need a permit and a barrier?

Yes. Fiberglass pools need the same building, electrical and plumbing permits and must meet the s. 515.27, F.S., safety feature requirement before final inspection.

Can a fiberglass pool be installed where the water table is high?

It can, but the design has to account for groundwater pushing up on the shell. Orange County, for example, asks fiberglass permit applicants to show the method used to resist hydrostatic pressure based on soil conditions, plus the leveling, step support and backfill methods.

Planning a pool in Lake County?

Send a short project brief. Playwell reviews it, reaches out by your preferred method, and schedules a site review before any quote.